Plumbing Considerations For Your Kitchen Remodel
Before beginning your kitchen remodel, you should think about the existing plumbing. Depending on the age of your home, you may need to reroute some installations. For example, if you are moving your dishwasher or sink, you may need to install new pipes. There are several tips to avoid plumbing disasters.
Keep Gas Piping in Place.
Before remodeling your kitchen, be sure to keep gas piping in place. It can be challenging to tell if your kitchen remodel will require gas lines. However, you should always install the new gas line safely and efficiently. To do this, you can use a double-wrench technique to loosen the fittings. This way, you will minimize the damage caused by threaded pieces under the valve. Next, clean the pipe’s threads with steel wool.
Before moving the gas piping for your cooktop or oven, note the location of the existing appliances. Gas ovens and cooktops require relocating gas lines and refrigerators with ice makers. If you’re planning to change the placement of these appliances, you’ll want to work with a professional before attempting to move them. Also, be sure to consult professionals in kitchen remodeling Neptune Beach to guarantee the safety of your gas line.
Avoid Moving Existing Plumbing
One of the most important things to remember when remodeling your kitchen is to avoid moving existing plumbing. Changing plumbing is an expensive project, and you will need to get permits to do so. Ensure your contractor has the proper permits and is licensed before beginning the project. Plumbing can also become damaged or faulty when rearranged, so be sure to contact a licensed contractor before starting any work. Ultimately, moving to plumbing can cause problems in the long run and cost you more money.
First, turn off the water and electricity before beginning work. Then you should plan to remove debris and secure the plumbing before starting the remodel. Rough-in work includes framing and plumbing inside walls. So, make sure to clean the room thoroughly. You may also need to move the plumbing to accommodate the new appliances.
Upgrade to Modern Plumbing
If you have older type iron pipes running through your home, upgrading to a contemporary plumbing choice like PVC is a good investment you can make while redesigning your kitchen. By updating, you will make it easier to repair your plumbing and reroute plumbing if you want your sink or appliances in a different position than they are now.
Cost to Install New Plumbing
The cost to install new plumbing for your kitchen remodel will depend on the type of material you want to use. For example, you can keep your layout the same, leaving only the water and gas lines. However, you can change the space’s look, which will raise your plumbing costs. Replacing a faucet, for example, costs about $920, about 4 percent of the overall remodel cost. In addition, some remodeling projects require major pipe rerouting.
In addition to replacing your main faucet, you may also need to replace your sink, water heater, and sewer lines. The average cost for a repipe is around $2,500 to $3,800, though the total cost can be much higher if you have a long distance between your home and your main sewer line. The cost of installing new plumbing for your kitchen remodel depends on local building codes and regulations.