Bathroom plumbing can be a real pain. That’s why many people use a plunger to unclog the drain. If you’ve ever tried to use a plunger to unclog a clogged bathroom drain, you know how ineffective it is. You’ll end up having to use a whole lot of elbow grease to get the clog out. In this post, we’ll show you a simple trick that works much better than a plunger.
Most of us have experienced this scenario at some point in our lives: You’re in the shower, enjoying the hot water, and then suddenly you feel a sharp pain in your neck. The next thing you know, you’re staring down a bathtub drain filled with hair.
How to unclog bathtub drain full of hair
Unclogging a clogged bathtub drain is not easy but with the help of proper tools and method you can get rid of it easily. In order to clean your bathtub drain you first need to know the reason why it got clogged in the first place. Clogged bathtub drains usually happen due to hair clogging it. If you have been facing the same issue then here are some of the reasons why your drain is getting clogged.
* Hair blocking the drain
* Buildup of soap scum
* Too much water
Once you know the reason behind it then you can use the right solution to fix it. In case of clogged bathtub drains full of hair it is recommended to use a plunger to push it out. A plunger should be pressed firmly on the drain while moving the plunger up and down. This way it will help in pushing out the hair from the drain.
In case of soap scum build up, you can try using an open ended wrench. You can hold the wrench in such a way that the tip rests on the drain and the handle part rests on the floor. You can try applying pressure by placing it on the drain and keep it there for several minutes. You can also use a small broom stick to remove the scum.
If the problem persists you need to consult a professional plumber. They have the required tools to clean and unclog the drain properly.
In case of clogged bathtub drains full of hair it is recommended to use a plunger to push it out. A plunger should be pressed firmly on the drain while moving the plunger up and down. This way it will help in pushing out the hair from the drain.
In case of soap scum build up, you can try using an open ended wrench. You can hold the wrench in such a way that the tip rests on the drain and the handle part rests on the floor. You can try applying pressure by placing it on the drain and keep it there for several minutes. You can also use a small broom stick to remove the scum.
If the problem persists you need to consult a professional plumber. They have the required tools to clean and unclog the drain properly.
In conclusion, the problem was caused by the hair clogging up the drain and stopping the flow of water. The first thing we did was to remove all the hair from the drain. Next, we tried a plunger and some drain cleaner, but that didn’t work. Then we decided to use a snake. A snake is a very thin flexible tube that is inserted into the drain to clear it out. After that, we used a bucket to catch the hair, and then we rinsed the bucket with hot water and detergent.
Leave a Reply